Mapefix EP 100 is an adhesive for chemically anchoring metal bars in holes drilled in building materials. It is a two component, pure epoxy resin-based product containing no solvents. It is available in 585 ml bi-axial cartridges. It is specifically formulated for anchoring threaded components and rebar made from steel and galvanized steel that transmit structural loads into solid substrates such as concrete, lightweight concrete, stone, wood and sound masonry. It is also suitable for anchoring metal bars in tension and compression zones, in cracked or non-cracked concrete, including in areas at risk of seismic activity (C1 and C2 classes). Also, because no stress is generated as with conventional mechanical expansion fasteners, it is an ideal solution for anchoring components close to edges or when there is a limited pitch between each anchor. The epoxy formulate Mapefix EP 100 allows for extended workability times (see Table 1), thus making the resin ideal for anchoring in case of high surrounding temperatures or if the application needs to be interrupted. The use of Mapefix EP 100 is recommended for any kind of anchors on a horizontal, vertical or sloping axis and on ceilings, in tension and compression zones subjected to static and dynamic stresses and seismic loads. Mapefix EP 100 may also be used for immersed and permanently damp anchors in marine and industrial surroundings exposed to aggressive chemicals. Application is allowed at temperatures between 0°C and +40°C, including on damp or wet substrates or in flooded holes. Mapefix EP 100 may be used for smooth, rough, core-drilled holes or holes made with a hammer-drill, and anchors with big or small circular crests.
